10E° Ka-Sat Event
10E
Ka-Sat Event
11345 H 27500
H.264
CW: 07 36 D5 12 75 1B 9D 2D
10E
Ka-Sat Event
11345 H 27500
H.264
CW: 07 36 D5 12 75 1B 9D 2D
↧
10E° Ka-Sat Event
↧
SETUP How to setup Mbox in AZbox HD
How to setup Mbox in AZbox HD
Prerequisites:
a- download the latest Mbox and unpack it
Note: for AZbox HD you will need only the following files from the comprehensive package for all kinds of different receivers, PCs and DVB-S cards: mbox_module and mbox.cfg [this one must be edited according to your needs];
b- However, mbox.prio and port.list files in the package are only examples [we shall come back to it]. Find good ones on the net and edit them according to your needs.
There are also similar files like ident.info, ignore.list and knows.ini files [from GBox] which apparently serve the same purpose but I didnt really spend time studying those yet ]
Apparently, if you have an original card that you want to share with people, but you want it to open the channels to which you subscribe, rather than trying to open them via virtual cards from the net [CS ] or by the Emulator itself [if something is ****** and available for our Emulators] by using those files you tell the module to go to your local card and not to the Emulator itself or CS etc. There are idents of providers in those file, there are false IDs, IDs you do not want searched from etc. etc.
Comments/info/good files welcome!!! This forum has a thread with a good Prio list, if not really comprehensive! As for the rest, I need to learn together with the rest of you
c- install Ultra Edit 32 or some such editor [UEStudio `06 is free]
d- download PuTTy from the net [free]
e- note your PCs and your AZbox HDs IP addresses
f- find good mbox.prio, ident.info and maybe even knows.ini [as I said, I dont know much about the exact workings of it but will I investigate]
=================CREATE OR EDIT YOUR FILES================
1) Using UE32 editor,thembox.cfg file should be edited [for AZbox HD] prior to that as follows [only the important parameters, the rest is not to be touched:
Quote:
Z: { 13 } { 192.168.x.*** 8000 } this line you need to edit with your PCs correct IP address, of course, plus the port, so Blacks Mbox plugin Mbox Control Centre would work
B: { 0 0 0 }
T: { /tmp/ }
K: { /EMU/OpenXCAS/MboxCAS/ }
P: { /tmp/pmt.tmp }
Warning: make sure you get the file from Mbox 0.5 latest package! Then edit that one, dont just copy the old one, as changes might occur in the meantime.
2) Now create your openxcas.conf, which should look like this, as Mower said [you can create a new one or edit an old one, using UE32 editor, as mentioned above]:
Quote:
[module] name = MboxCAS
daemon = mbox_module
version = 1.00
3) Your cwshare.cfg should look like this [this is but a template but all you need to do is just edit the M and G lines at the bottom]:
##################################
# Mbox CS config file #
##################################
# CaID
#H: { 091F0FF3 }
# Send ECMs at maximum 5 cards (please use this as default)
X: { 8 }
# Preffered cards ids (up to 32)
#X+: { 09610000:5 }
#X+: { 093B0000:10 }
#X+: { 0B000000:5 }
# max cards distance to use for ecm
I: { 3 }
#NDS system ->Resending ECM(s) on timeout interval
#N: { 400 200 }
N: { 400 200 }
#NDS system ->Resending ECM(s) on timeout interval
#
#4000 (4 seconds)-> resend current ecm on boxid if no dcw
#2000 (2 seconds)-> wait 2 more seconds for dcw ,if no dcw on time resend ecm(s) to all boxids
#
O: { 6000 4000 }
#Connecting to newcamd server program Newcs
#
M: { myown.dyndns.org { mypassword}}
#
G: { mypeer.dyndns.something { our ports { hispassword { A2 A2 }}}}
G: { mypeer.dyndns.something { our ports { hispassword { A3 A3 }}}}
================FTP YOUR FILES TO AZBOX HD================
4) Connect with your AZbox HD via FTP like FilleZilla client, put your boxs IP, use root as username and azbox as password, port 22 [Mbox CC will use port 21] -> connect, then go to EMU folder -> click on OpenXCAS folder
5) In OpenXCAS folder make the MboxCAS folder via FilleZilla FTP client, [Linux is case sensitive, so its MboxCAS] . Inside the OpenXCAS folder right click on empty space -> Create directory -> name it as described -> OK. It should be given the rights, this folder, so in FilleZilla: right click on MboxCAS folder -> File permissions -> 755 -> OK
6) Copy [drag and drop] into it: mbox_module, mbox.cfg, cwshare.cfg and port.list. Give the rights [right click on it -> File permissions -> 755 -> OK] to mbox_module only.
7) In your AZbox HD, using your FileZilla, find the /EMU/OpenXCAS/ folder [one up from MboxCAS]. In it you should find and if you havent got it then create it a file called module.seq to make Mbox the starting module [right click on it -> File permissions -> 755]. This is what it should look like:
MboxCAS
#mgcamd
#MultiCAS
#newcs
Thats it!!! At this point we need no other scripts [files], says Mower!
8) According to Mowers advice all you now need to do is to try to start the Mbox module, using Telnet [PuTTy or some such proggy], to make sure the module will start and there are no errors.
So, start the PuTTy.exe by double clicking on it,
log in with root as username [hit Enter on your keyboard],
azbox as password [Enter],
then the following 3 commands [Copy & Paste and Enter for each] to kick-start Mbox
and youll see the traffic/log/whats going on:
cd /EMU/OpenXCAS/MboxCAS/
chmod 755 mbox_module
./mbox_module
9) If it isnt working I would advise you to REBOOT, then try the Telnet thing again.
====================THE NEXT STAGE====================
10) If everything is OK and you didnt mess up the editing [and the files are in good working order, of course] you can now try to experiment with other scripts, like mbox.sh file, which looks like this [use your UE32 to create it just C&P the following into UE32]:
cd /EMU/OpenXCAS/MboxCAS
./mbox_module /EMU/OpenXCAS/MboxCAS/mbox.cfg &
Save it as mbox.sh and put it into the MboxCAS folder via FTP, give it CHMOD rights to 755, then reboot your receiver and then restart Mbox, if needed.
11) If everything isnt working you can then try to add the following files to AZbox HDs MboxCAS folder and try to start or improve the working of Mbox: mbox.prio [a must!].
11a) Then, allegedly, even ident.info, ignore.list and knows.ini [the last two I got from my old GBox, which need to be edited according to your needs, to your setup, as I mentioned earlier].
12) In my OpenXCAS folder I also have openxcas.conf looking like this [one must edit it according to the plugins one has installed]:
[modules] count = 4
active_auto = true
active_1 = MultiCAS
active_2 = newcs
active_3 = mgcamd
active_4 = MboxCAS [module_1] name = MultiCAS
daemon = emu_module
version = 1.57C [module_2] name = newcs
daemon = newcs
argument = -nd
version = 1.6
xcasapi = FALSE [module_3] name = mgcamd
daemon = mgcamd
version = 1.32
# argument = -a 3 [module_4] ap= Yes
name = MboxCAS
daemon = mbox_module /EMU/OpenXCAS/MboxCAS/mbox.cfg
xcasapi = TRUE
wait=13 sec
version = 0.5-7
================THE LAST WARNING=============== AZbox HD, its firmware, is still in developmental stage and so are the programs/plugins that go with it. It all keeps changing, evolving! Ergo, KEEP YOUR COOL, BY KEEPING THIS IN MIND!Things are not yet perfect but they are improving!!!
Prerequisites:
a- download the latest Mbox and unpack it
Note: for AZbox HD you will need only the following files from the comprehensive package for all kinds of different receivers, PCs and DVB-S cards: mbox_module and mbox.cfg [this one must be edited according to your needs];
b- However, mbox.prio and port.list files in the package are only examples [we shall come back to it]. Find good ones on the net and edit them according to your needs.
There are also similar files like ident.info, ignore.list and knows.ini files [from GBox] which apparently serve the same purpose but I didnt really spend time studying those yet ]
Apparently, if you have an original card that you want to share with people, but you want it to open the channels to which you subscribe, rather than trying to open them via virtual cards from the net [CS ] or by the Emulator itself [if something is ****** and available for our Emulators] by using those files you tell the module to go to your local card and not to the Emulator itself or CS etc. There are idents of providers in those file, there are false IDs, IDs you do not want searched from etc. etc.
Comments/info/good files welcome!!! This forum has a thread with a good Prio list, if not really comprehensive! As for the rest, I need to learn together with the rest of you
c- install Ultra Edit 32 or some such editor [UEStudio `06 is free]
d- download PuTTy from the net [free]
e- note your PCs and your AZbox HDs IP addresses
f- find good mbox.prio, ident.info and maybe even knows.ini [as I said, I dont know much about the exact workings of it but will I investigate]
=================CREATE OR EDIT YOUR FILES================
1) Using UE32 editor,thembox.cfg file should be edited [for AZbox HD] prior to that as follows [only the important parameters, the rest is not to be touched:
Quote:
Z: { 13 } { 192.168.x.*** 8000 } this line you need to edit with your PCs correct IP address, of course, plus the port, so Blacks Mbox plugin Mbox Control Centre would work
B: { 0 0 0 }
T: { /tmp/ }
K: { /EMU/OpenXCAS/MboxCAS/ }
P: { /tmp/pmt.tmp }
Warning: make sure you get the file from Mbox 0.5 latest package! Then edit that one, dont just copy the old one, as changes might occur in the meantime.
2) Now create your openxcas.conf, which should look like this, as Mower said [you can create a new one or edit an old one, using UE32 editor, as mentioned above]:
Quote:
[module] name = MboxCAS
daemon = mbox_module
version = 1.00
3) Your cwshare.cfg should look like this [this is but a template but all you need to do is just edit the M and G lines at the bottom]:
##################################
# Mbox CS config file #
##################################
# CaID
#H: { 091F0FF3 }
# Send ECMs at maximum 5 cards (please use this as default)
X: { 8 }
# Preffered cards ids (up to 32)
#X+: { 09610000:5 }
#X+: { 093B0000:10 }
#X+: { 0B000000:5 }
# max cards distance to use for ecm
I: { 3 }
#NDS system ->Resending ECM(s) on timeout interval
#N: { 400 200 }
N: { 400 200 }
#NDS system ->Resending ECM(s) on timeout interval
#
#4000 (4 seconds)-> resend current ecm on boxid if no dcw
#2000 (2 seconds)-> wait 2 more seconds for dcw ,if no dcw on time resend ecm(s) to all boxids
#
O: { 6000 4000 }
#Connecting to newcamd server program Newcs
#
M: { myown.dyndns.org { mypassword}}
#
G: { mypeer.dyndns.something { our ports { hispassword { A2 A2 }}}}
G: { mypeer.dyndns.something { our ports { hispassword { A3 A3 }}}}
================FTP YOUR FILES TO AZBOX HD================
4) Connect with your AZbox HD via FTP like FilleZilla client, put your boxs IP, use root as username and azbox as password, port 22 [Mbox CC will use port 21] -> connect, then go to EMU folder -> click on OpenXCAS folder
5) In OpenXCAS folder make the MboxCAS folder via FilleZilla FTP client, [Linux is case sensitive, so its MboxCAS] . Inside the OpenXCAS folder right click on empty space -> Create directory -> name it as described -> OK. It should be given the rights, this folder, so in FilleZilla: right click on MboxCAS folder -> File permissions -> 755 -> OK
6) Copy [drag and drop] into it: mbox_module, mbox.cfg, cwshare.cfg and port.list. Give the rights [right click on it -> File permissions -> 755 -> OK] to mbox_module only.
7) In your AZbox HD, using your FileZilla, find the /EMU/OpenXCAS/ folder [one up from MboxCAS]. In it you should find and if you havent got it then create it a file called module.seq to make Mbox the starting module [right click on it -> File permissions -> 755]. This is what it should look like:
MboxCAS
#mgcamd
#MultiCAS
#newcs
Thats it!!! At this point we need no other scripts [files], says Mower!
8) According to Mowers advice all you now need to do is to try to start the Mbox module, using Telnet [PuTTy or some such proggy], to make sure the module will start and there are no errors.
So, start the PuTTy.exe by double clicking on it,
log in with root as username [hit Enter on your keyboard],
azbox as password [Enter],
then the following 3 commands [Copy & Paste and Enter for each] to kick-start Mbox
and youll see the traffic/log/whats going on:
cd /EMU/OpenXCAS/MboxCAS/
chmod 755 mbox_module
./mbox_module
9) If it isnt working I would advise you to REBOOT, then try the Telnet thing again.
====================THE NEXT STAGE====================
10) If everything is OK and you didnt mess up the editing [and the files are in good working order, of course] you can now try to experiment with other scripts, like mbox.sh file, which looks like this [use your UE32 to create it just C&P the following into UE32]:
cd /EMU/OpenXCAS/MboxCAS
./mbox_module /EMU/OpenXCAS/MboxCAS/mbox.cfg &
Save it as mbox.sh and put it into the MboxCAS folder via FTP, give it CHMOD rights to 755, then reboot your receiver and then restart Mbox, if needed.
11) If everything isnt working you can then try to add the following files to AZbox HDs MboxCAS folder and try to start or improve the working of Mbox: mbox.prio [a must!].
11a) Then, allegedly, even ident.info, ignore.list and knows.ini [the last two I got from my old GBox, which need to be edited according to your needs, to your setup, as I mentioned earlier].
12) In my OpenXCAS folder I also have openxcas.conf looking like this [one must edit it according to the plugins one has installed]:
[modules] count = 4
active_auto = true
active_1 = MultiCAS
active_2 = newcs
active_3 = mgcamd
active_4 = MboxCAS [module_1] name = MultiCAS
daemon = emu_module
version = 1.57C [module_2] name = newcs
daemon = newcs
argument = -nd
version = 1.6
xcasapi = FALSE [module_3] name = mgcamd
daemon = mgcamd
version = 1.32
# argument = -a 3 [module_4] ap= Yes
name = MboxCAS
daemon = mbox_module /EMU/OpenXCAS/MboxCAS/mbox.cfg
xcasapi = TRUE
wait=13 sec
version = 0.5-7
================THE LAST WARNING=============== AZbox HD, its firmware, is still in developmental stage and so are the programs/plugins that go with it. It all keeps changing, evolving! Ergo, KEEP YOUR COOL, BY KEEPING THIS IN MIND!Things are not yet perfect but they are improving!!!
↧
↧
EXPLAIN how to Streaming AZBox HD
pentru streaming in wifi: (doar unicast) reteaua WiFi ramane OK
AZ>UTP>ROUTER>WiFi>PC (AZ>WiFI>ROUTER>WiFi>PC:netestat)
AZBox:
* ip:192.168.X.X(adresa IP a computerului client)
* port: 9000
* timp: nedefinit(ramane setat pe ultimile vs. fw)
in PC(VLC):
* protocol: UDP
* ip: fara ip,224.1.1.100 sau 192.168.X.X(adresa IP a PC)
* port:9000
udp://:9000
udp://@224.1.1.100:9000
udp://@192.168.X.X:9000
pentru streaming LAN (accepta muticast), taie reteaua de WiFi ptr. restul device-urilor.(la mine)
AZ>UTP>ROUTER>UTP>VLC
AZBox:
* ip:224.1.1.100(adresa IP a computerului client)
* port: 9000
* timp: nedefinit
in PC(VLC):
* protocol: UDP
* ip:224.1.1.100
* port:9000
functioneaza perfect SD, la HD1080 face un pic de freeze, cele 720 merg bine.
testate pe FW 0.9.4466,VLC v.1.0.5,Vista, WiFi N, CAT5.
PC to AZBox
pentru IP CHANNEL in AZBox se seteaza:
* protocol:UDP
* channel name: ~la alegere~default VideoLAN
* ip address: ~adresa ip a PC(192.168.X.X)
* port n°:~1234~
* buffer size:~99999~
In PC(VLC)
se activeaza transcodarea fluxului in incapsulare MPEG-TS cu codec video H264 si audio AAC(TS).
pentru inregistrari in VLC, se activeaza in Vizualizare/Controale avansate..(folderul initial este in C:/user/Documents)
rulat cu succes mkv, DVD,DVD ISO, radio online, webcam
AZ>UTP>ROUTER>WiFi>PC (AZ>WiFI>ROUTER>WiFi>PC:netestat)
AZBox:
* ip:192.168.X.X(adresa IP a computerului client)
* port: 9000
* timp: nedefinit(ramane setat pe ultimile vs. fw)
in PC(VLC):
* protocol: UDP
* ip: fara ip,224.1.1.100 sau 192.168.X.X(adresa IP a PC)
* port:9000
udp://:9000
udp://@224.1.1.100:9000
udp://@192.168.X.X:9000
pentru streaming LAN (accepta muticast), taie reteaua de WiFi ptr. restul device-urilor.(la mine)
AZ>UTP>ROUTER>UTP>VLC
AZBox:
* ip:224.1.1.100(adresa IP a computerului client)
* port: 9000
* timp: nedefinit
in PC(VLC):
* protocol: UDP
* ip:224.1.1.100
* port:9000
functioneaza perfect SD, la HD1080 face un pic de freeze, cele 720 merg bine.
testate pe FW 0.9.4466,VLC v.1.0.5,Vista, WiFi N, CAT5.
PC to AZBox
pentru IP CHANNEL in AZBox se seteaza:
* protocol:UDP
* channel name: ~la alegere~default VideoLAN
* ip address: ~adresa ip a PC(192.168.X.X)
* port n°:~1234~
* buffer size:~99999~
In PC(VLC)
se activeaza transcodarea fluxului in incapsulare MPEG-TS cu codec video H264 si audio AAC(TS).
pentru inregistrari in VLC, se activeaza in Vizualizare/Controale avansate..(folderul initial este in C:/user/Documents)
rulat cu succes mkv, DVD,DVD ISO, radio online, webcam
↧
GUIDE EN - How to recover a booting blocked Azbox - v1.2
EN - How to recover a booting blocked Azbox - v1.2
Some image for GUIDE
![]()
![]()
![]()
![]()
![]()
Some image for GUIDE
↧
LOADER AZUP last Version
hello Guys !!
thank you for join us
you can download all Loaders or any azup for azbox
thank you for join us
you can download all Loaders or any azup for azbox
↧
↧
NEWS Azbox Elite original
Azbox Elite
![]()
![]()
![]()
![]()
![]()
![]()
↧
GUIDE IPK Creator
You Need To Have JRE (Java Runtime Environment) !
Download It From http://www.filehippo.com/download_jre/
You Need To Install 1.7.x Versions
After Installing JRE Just Run run.bat
Still In Development !
↧
JaZUp_2.4_by_Hectore_and_Pr2
JaZUp User Guide v2.4
Introduction:
JaZup is a Java based application that allow you to
upgrade your AZBox to Enigma 2 and come back to
the official firmware. You can also use it to upgr
ade from E2 to E2.
It supports installing Azbox HD Enigma 2 firmware o
n:
DOM: the internal AZBox memory,
USB: for this option you will need to have 1 USB St
ick (see further in this document)
be careful a
USB HDD is viewed has any USB stick and you can los
e your data.
HDD: internal hard disk drive (this option only app
lies to Premium, Premium Plus and Ultra), if
you have an external HDD and want to use it for ins
tall use USB option.
Since JaZUp 2.1, we include a fix to prevent bricki
ng your Azbox after having use the Firmware for USB
(FW4USB) method to boot the official firmware from
USB while trying to return with the official
firmware in DOM.
Note: FW4USB is not implement in JaZUp so users usi
ng only JaZUp to flash their Azbox will not face
this problem.
JaZUp has been tested under Windows, Mac OSX and Ub
untu.
If you enjoy JaZUp 2.4, please consider make a dona
tion. See paypal link within JaZUp.
It is strongly advised to
disable Hardware Acceleration before upgrading your
Azbox
to E2. Hardware Acceleration is the main reason why
some Azbox HD goes to
Booting... (forever) problem
.
If you connect with JaZUp to your Azbox running the
official firmware, it will check
for it and disable it for you.
Please read carefully this User Guide since it cont
ains important information on how to use this
tool.
We are not responsible for any data lost that you m
ay encountered using this tool.
It is your responsibility to backup all your data (
HDD, USB, DOM) from your Azbox HD before
using this tool.
Pre-Requisite:
In order to enjoy JaZUp you will to have installed
on your computer a Java Runtime Environment.
You can find the latest Java Runtime Environment mi
nimum version is 1.5 (commonly called version 5)
from:
http://www.java.com
Your Azbox must be connected to a wired network (RJ
45) where DHCP server is enabled.
JaZUp by Hectore and Pr2,
p
lease consider to donate.
- 1 / 17 -
Interface explanations:
Azbox IP
: there you can type your Azbox IP address
Password
: is the password that you set on your Azbox offici
al firmware (used if you select Backup or
Restore Informations Official Firmware options).
Target
: allows you to select where to install the E2 firm
ware
E2 option:
Format extendend partition
: you can decided not to format your extended parti
tion, this option is
useful only if you upgrade your Azbox from E2 to E2
.
Ext4 Paritition:
it will try to use ext4 (only supported in 1.1.12
(RC12) and higher) uncheck this if
you want to go back to ext3.
Backup data Official Firmware
: allows you to take a backup of /DISK2 and /PLUGIN
S
Restore data Official Firmware
: allows you to restore your previous backup of /D
ISK2 and
/PLUGINS.
Azbox IP Find: Search:
perform an automatic discovery of your Azbox on yo
ur local network.
Informations:
will show you the update progress indication. Be
careful some operations take a very
long time , so please be patient.
Select Language:
allows you to select the JaZUp interface language.
JaZUp by Hectore and Pr2,
p
lease consider to donate.
- 2 / 17 -
![]()
Azbox IP Find Search:
Pressing the Search... button, JaZUp will look for
the all the Azboxes connected to your network and
propose the list of the IP address that it founds.
If you think that your Azbox is not in the list pre
ss again search to start it again.
If you have several network interfaces in your PC,
all the interfaces will be scanned to search for yo
ur
Azbox.
Once your Azbox is discovered, you can click on the
IP address and the field: Azbox IP will be
automatically filled up.
If the search function doesn't work, you can always
type in manually your Azbox IP address in the Azbo
x
IP field.
JaZUp by Hectore and Pr2,
p
lease consider to donate.
- 3 / 17 -
Introduction:
JaZup is a Java based application that allow you to
upgrade your AZBox to Enigma 2 and come back to
the official firmware. You can also use it to upgr
ade from E2 to E2.
It supports installing Azbox HD Enigma 2 firmware o
n:
DOM: the internal AZBox memory,
USB: for this option you will need to have 1 USB St
ick (see further in this document)
be careful a
USB HDD is viewed has any USB stick and you can los
e your data.
HDD: internal hard disk drive (this option only app
lies to Premium, Premium Plus and Ultra), if
you have an external HDD and want to use it for ins
tall use USB option.
Since JaZUp 2.1, we include a fix to prevent bricki
ng your Azbox after having use the Firmware for USB
(FW4USB) method to boot the official firmware from
USB while trying to return with the official
firmware in DOM.
Note: FW4USB is not implement in JaZUp so users usi
ng only JaZUp to flash their Azbox will not face
this problem.
JaZUp has been tested under Windows, Mac OSX and Ub
untu.
If you enjoy JaZUp 2.4, please consider make a dona
tion. See paypal link within JaZUp.
It is strongly advised to
disable Hardware Acceleration before upgrading your
Azbox
to E2. Hardware Acceleration is the main reason why
some Azbox HD goes to
Booting... (forever) problem
.
If you connect with JaZUp to your Azbox running the
official firmware, it will check
for it and disable it for you.
Please read carefully this User Guide since it cont
ains important information on how to use this
tool.
We are not responsible for any data lost that you m
ay encountered using this tool.
It is your responsibility to backup all your data (
HDD, USB, DOM) from your Azbox HD before
using this tool.
Pre-Requisite:
In order to enjoy JaZUp you will to have installed
on your computer a Java Runtime Environment.
You can find the latest Java Runtime Environment mi
nimum version is 1.5 (commonly called version 5)
from:
http://www.java.com
Your Azbox must be connected to a wired network (RJ
45) where DHCP server is enabled.
JaZUp by Hectore and Pr2,
p
lease consider to donate.
- 1 / 17 -
Interface explanations:
Azbox IP
: there you can type your Azbox IP address
Password
: is the password that you set on your Azbox offici
al firmware (used if you select Backup or
Restore Informations Official Firmware options).
Target
: allows you to select where to install the E2 firm
ware
E2 option:
Format extendend partition
: you can decided not to format your extended parti
tion, this option is
useful only if you upgrade your Azbox from E2 to E2
.
Ext4 Paritition:
it will try to use ext4 (only supported in 1.1.12
(RC12) and higher) uncheck this if
you want to go back to ext3.
Backup data Official Firmware
: allows you to take a backup of /DISK2 and /PLUGIN
S
Restore data Official Firmware
: allows you to restore your previous backup of /D
ISK2 and
/PLUGINS.
Azbox IP Find: Search:
perform an automatic discovery of your Azbox on yo
ur local network.
Informations:
will show you the update progress indication. Be
careful some operations take a very
long time , so please be patient.
Select Language:
allows you to select the JaZUp interface language.
JaZUp by Hectore and Pr2,
p
lease consider to donate.
- 2 / 17 -
Azbox IP Find Search:
Pressing the Search... button, JaZUp will look for
the all the Azboxes connected to your network and
propose the list of the IP address that it founds.
If you think that your Azbox is not in the list pre
ss again search to start it again.
If you have several network interfaces in your PC,
all the interfaces will be scanned to search for yo
ur
Azbox.
Once your Azbox is discovered, you can click on the
IP address and the field: Azbox IP will be
automatically filled up.
If the search function doesn't work, you can always
type in manually your Azbox IP address in the Azbo
x
IP field.
JaZUp by Hectore and Pr2,
p
lease consider to donate.
- 3 / 17 -
↧
Neutrino: Loaders AzBox AZtrino last version
↧
↧
Azbox Patch
↧
Free IP TV LIST 900 CH OSN,CANALSAT,CANAL+ESP,SKYIT,ĐỂ,UK,MẸO,NOS,DIGI TURK,beIN,....OTHERS
Free IP TV LIST 900 CH OSN,CANALSAT,CANAL+ESP,SKYIT,ĐỂ,UK,MẸO,NOS,DIGI TURK,beIN,....OTHERS
********************
![]()
![]()
![]()
![]()
![]()
![]()
********************
Civil_IPTV_25_9_2015.m3u
********************
********************
Civil_IPTV_25_9_2015.m3u
↧
Tvsat hd Italy + srg Swiss
Hi, I have tvsat and srg local. I'm looking for sky ita! Happy sharing
↧
Best iptv server italy maximum quality and reliability kink server
IPTV LISTA CANAL STREMANING DA USARE PER PC SMART TV DECODER LINUX BASATI SU ENIGMA2 SMARTFON DOPO AQUISTO SPECIFICARE PER EMIL QUALE DISPOSITIVO LO SI DESIDERA COSA OCCORRE PER USARE IPTV?
UN PC CON PROGRAMMA VLC O XBMC , UN SMART TV CON L'APP SMARTIPTV INSTALLATA , UN TABLET O SMARTPHONE ANDROID O UN DECODER A ENIGMA 2 O SPARK ,E UNA BUONA CONNESSIONE ADSL ( MINIMO 4 MEGA )E POTRETE USUFRUIRE DEL SERVIZIO SATELLITARE E TERRESTRE TUTTO IN HD.
NON OCCORRE PARABOLA O ANTENNA TV.
PACHETTO
SKI ITA+PPV+ONDEMAN
MEDIASET PREMIUM
SKY DE+PPV
SKY UK
D+ESPANA
FRANCIA
MEO MEGA PORTOGALLO
SERBI PIK TV
CROATI
TUTTO IN MASSIMA QUALITA
PAGHETTO FULL COMPLETO IPTV +CLINE
1 MESE IPTV + CLINE NO FREZZE 18 EURO
3 MESI IPTV+ CLINE NO FREZZE 54 EURO
6 MESI IPTV+ CLINE NO FREZZE 108 EURO
12 MESI IPTV+ CLINE NO FREZZE 200 EURO
#############################
PAGHETTO SOLO IPTV
1 MESE IPTV 15 EURO
2 MESI IPTV 30 EURO
3 MESI IPTV 45 EURO
6 MESI IPTV 70 EURO
12 MESI IPTV 130 EURO
PAGAMENTO PAYAL O POSTPEY
CONTATTO EMEL FRENC.LUBRANO@GMAIL.COM
SKYPE ESPANICO.SERVER 24\7 SUPPORTO
24/7 ONLINE, PROFESSIONALE , SOLIDO SERVIZIO DI GARANZIA .
(INPTORTANTE DA LEGGERE) PRIMO DELL AQUISTO
IPTV E UN SERVIZIO NUOVO BASATO SU CODIFICHE E FLUSSI ALLORA LA LISTA CANALI E
SEMPRE IN FASE DI AGGIORNAMENTO ALLORA QUALCHE CANALE AVVOLTE IL SUO FLUSSO SI
PUO INTERRONPERE (MA SEMPRE RIPRISTINATO IN POCO TEMPO) PER SVARIATI MOTIVI QUINDI
ESSERE A CONOSCENZA E NON CHIEDERE SEMPRE AL VENDITORE INUTILI DOMANDE NOI DIAMO
IL MASSIMA QUALITA E AFFIDABILITA AL SERVIZIO LAVORIAMO AL SERVER 24/7 PER GARANTIRE SEMPRE IL MASSIMO GRAZIE
Quanta banda devo avere per fruire di tali servizi ?
-Attraverso una ADSL comune il minimo sono 7Mb (considerando che un canale in HD occupa in media dai 450kb/s ai 650 Kb/s)
IPTV ogni tanto si blocca e va a scatti!
La tua adsl non riesce ad essere sufficiente alla quantità di dati in richiesti per la visione del flusso video.
Se si blocca o va a scatti avrai troppi dispositivi collegati che contemporaneamente utilizzano e saturano la banda della tua ADSL.
Se hai una 7Mb sarai quasi certamente costretto a spegnere o comunque non utilizzare altri dispositivi oltre che quello collegato alla TV per vedere IPTV.
Se hai una 20Mb o superiore non dovresti riscontrare nessun tipo di problema.
UN PC CON PROGRAMMA VLC O XBMC , UN SMART TV CON L'APP SMARTIPTV INSTALLATA , UN TABLET O SMARTPHONE ANDROID O UN DECODER A ENIGMA 2 O SPARK ,E UNA BUONA CONNESSIONE ADSL ( MINIMO 4 MEGA )E POTRETE USUFRUIRE DEL SERVIZIO SATELLITARE E TERRESTRE TUTTO IN HD.
NON OCCORRE PARABOLA O ANTENNA TV.
PACHETTO
SKI ITA+PPV+ONDEMAN
MEDIASET PREMIUM
SKY DE+PPV
SKY UK
D+ESPANA
FRANCIA
MEO MEGA PORTOGALLO
SERBI PIK TV
CROATI
TUTTO IN MASSIMA QUALITA
PAGHETTO FULL COMPLETO IPTV +CLINE
1 MESE IPTV + CLINE NO FREZZE 18 EURO
3 MESI IPTV+ CLINE NO FREZZE 54 EURO
6 MESI IPTV+ CLINE NO FREZZE 108 EURO
12 MESI IPTV+ CLINE NO FREZZE 200 EURO
#############################
PAGHETTO SOLO IPTV
1 MESE IPTV 15 EURO
2 MESI IPTV 30 EURO
3 MESI IPTV 45 EURO
6 MESI IPTV 70 EURO
12 MESI IPTV 130 EURO
PAGAMENTO PAYAL O POSTPEY
CONTATTO EMEL FRENC.LUBRANO@GMAIL.COM
SKYPE ESPANICO.SERVER 24\7 SUPPORTO
SERVIZIO DI 1 MESE DI GARANZIA MASSIMA AFIDABILITA
24/7 ONLINE, PROFESSIONALE , SOLIDO SERVIZIO DI GARANZIA .
(INPTORTANTE DA LEGGERE) PRIMO DELL AQUISTO
IPTV E UN SERVIZIO NUOVO BASATO SU CODIFICHE E FLUSSI ALLORA LA LISTA CANALI E
SEMPRE IN FASE DI AGGIORNAMENTO ALLORA QUALCHE CANALE AVVOLTE IL SUO FLUSSO SI
PUO INTERRONPERE (MA SEMPRE RIPRISTINATO IN POCO TEMPO) PER SVARIATI MOTIVI QUINDI
ESSERE A CONOSCENZA E NON CHIEDERE SEMPRE AL VENDITORE INUTILI DOMANDE NOI DIAMO
IL MASSIMA QUALITA E AFFIDABILITA AL SERVIZIO LAVORIAMO AL SERVER 24/7 PER GARANTIRE SEMPRE IL MASSIMO GRAZIE
Quanta banda devo avere per fruire di tali servizi ?
-Attraverso una ADSL comune il minimo sono 7Mb (considerando che un canale in HD occupa in media dai 450kb/s ai 650 Kb/s)
IPTV ogni tanto si blocca e va a scatti!
La tua adsl non riesce ad essere sufficiente alla quantità di dati in richiesti per la visione del flusso video.
Se si blocca o va a scatti avrai troppi dispositivi collegati che contemporaneamente utilizzano e saturano la banda della tua ADSL.
Se hai una 7Mb sarai quasi certamente costretto a spegnere o comunque non utilizzare altri dispositivi oltre che quello collegato alla TV per vedere IPTV.
Se hai una 20Mb o superiore non dovresti riscontrare nessun tipo di problema.
↧
↧
SOFT Azbox Tools last version
Azbox/Tools/FileZilla
Azbox/Tools/pumpkin
Azbox/Tools/putty
Azbox/Tools/pumpkin
Azbox/Tools/putty
↧
EXPLAIN Azbox Emergency Flash
How To Reflash the box without acess to MENU -> EMERGENCY FLASH This procedure should be used ONLY in case that was not possible acess to Menu.
1) Download a new firmware from the Azbox web site. (Format of software should be patch.bin)
2) Copy the firmware file to your USB memory stick.
3) Insert the USB memory stick into the USB port of the digital receiver.
4) Power OFF and POWER ON the reciever with the USB Memory INSIDE.
5) Wait for instructions on VFD or in screen. If you cannot see anything on TV screen use RCA or scart (not HDMI)
6) If every thing is ok The receiver will install new Software and you can recovery back the control of your receiver.
AND IF YOU CANNOT GO TO TO BOOT MENU (STEP 5), or if your box STAY all time on booting phase, reboot it and when saw Checking on VFD press several times the button OK until go to BOOT MENU.
DO NOT DO THIS OPERATION WITH A NTFS HDD PLUGGED IN
!!!! DO NOT POWER OFF OR REBOOT DURING THE UPDATE PROCESS !!!!
IMPORTANT NOTEYour USB memory must be formatted in the FAT file system. Otherwise, the digital receiver cannot recognize your USB memory. In addition, the digital receiver can only recognize files and directories which are named with only alphabetic, numeric and underscore letters. If there is a file or folder named with other letters, the digital receiver cannot recognize not only it but also its subsequent files and folders.
Învăţarea este o atitudine, pentru ca te pune în situaţia de a alege şi te face direct responsabil!
1) Download a new firmware from the Azbox web site. (Format of software should be patch.bin)
2) Copy the firmware file to your USB memory stick.
3) Insert the USB memory stick into the USB port of the digital receiver.
4) Power OFF and POWER ON the reciever with the USB Memory INSIDE.
5) Wait for instructions on VFD or in screen. If you cannot see anything on TV screen use RCA or scart (not HDMI)
6) If every thing is ok The receiver will install new Software and you can recovery back the control of your receiver.
AND IF YOU CANNOT GO TO TO BOOT MENU (STEP 5), or if your box STAY all time on booting phase, reboot it and when saw Checking on VFD press several times the button OK until go to BOOT MENU.
DO NOT DO THIS OPERATION WITH A NTFS HDD PLUGGED IN
!!!! DO NOT POWER OFF OR REBOOT DURING THE UPDATE PROCESS !!!!
IMPORTANT NOTEYour USB memory must be formatted in the FAT file system. Otherwise, the digital receiver cannot recognize your USB memory. In addition, the digital receiver can only recognize files and directories which are named with only alphabetic, numeric and underscore letters. If there is a file or folder named with other letters, the digital receiver cannot recognize not only it but also its subsequent files and folders.
Învăţarea este o atitudine, pentru ca te pune în situaţia de a alege şi te face direct responsabil!
↧
Qualità, Affidabilità e Cortesia. Il nostro marchio di Fabbrica. Provare per credere.
SIAMO ARRIVATI
PROVA LA NOSTRA QUALITA' e CONVENIENZA
PROVA LA NOSTRA QUALITA' e CONVENIENZA
Testa Gratis per provare il nostro servizio IPTV
Il nostro pacchetto comprende: Sky Italia Mediaset Canali Stranieri - (decine di canali in HD)
La lista dei canali è in continua evoluzione.
On Demand con centinaia di Films e Serie Tv, tutti rigorosamente in Italiano (lista che si aggiorna settimanalmente)
I server ed i flussi sono di nostra proprietà (nessun re-share), offriamo Qualità e Stabilità Superiore alla media.
I Sistemi supportati sono:
- IPTV Compatible Recievers Enigma 2 (DM800HD,DM500HD,VU+,Cloud i-box,Gigablue..ect )
- Computer ( VLC player ) or ( Simple Tv )or ( XBMC )
- Android Devices (Samsung Galaxy / iPhone / Ipad / Galaxy Tab)
1. android tv boxes
2. android tablets
3. android smartphones
4. Smart TV
Coloro che saranno scoperti a re-sherare, saranno bannati immediatamente
Importante: Prima di abbonarti o di chiedere un semplice test di prova, segnalami il nome del decoder e soprattutto il Sistema che supporta.
Per maggiori informazioni:
Skype: iptv gold
Email: iptvgold1975@gmail.com
Abbonamenti:
1 mese: 10 euro
3 mesi: 27 euro
6 mesi: 50 euro
1 anno: 90 euro (miglior acquisto)
Assistenza 7 giorni su 7 - 24h / 24h
SIAMO ALLA RICERCA DI RESELLERS SERI!!!!!!!!!!
OTTIME CONDIZIONI anche pannelli a credito, per una Vostra maggiore comodità -----
Offriamo serietà e pretendiamo serietà.
Contattateci per il test gratis, è molto importante per verificare la nostra qualità.
Per cortesia astenersi PERDITEMPO e coloro che si fanno inviare test di prova come HOBBY.
Metodo di Pagamento:
1- Paypal
2- Skrill
MOLTO IMPORTANTE:
Quando effettuate il pagamento non indicate niente nelle note, soprattutto niente legato a streaming o IPTV, ignoreremo tali versamenti
↧
INFO IPTV Server PlayBack Devices?
Systems to use your IPTV SERVER :
NOTE
| XBMC Media Center is an award-winning free media player and entertainment hub for digital media. XBMC is available for Linux, OSX, and Windows. More than 50 software developers have contributed to XBMC, and 100-plus translators have worked to expand its reach, making it available in more than 30 languages and on smart TVs. |  |
NOTE
| Android is a mobile operating system (OS) based on the Linux kernel and currently developed by Google. With a user interface based on direct manipulation, Android is designed primarily for touchscreen mobile devices such as smartphones and tablet computers, with specialized user interfaces for televisions (Android TV), cars (Android Auto), and wrist watches (Android Wear). | |
NOTE
| MAG IPTV BOX! Since 2007, Infomir has been developing and manufacturing set-top boxes under the MAG brand to the latest Mag 254 IPTV box. Our iptv solutions allow you up-to-date popular personalized TV services: IPTV SERVER, video on demand (VoD), OTT. | |
↧
↧
hi
Hi all, im the newest member to the board
↧
HI
Hello all. Thanks for accepting me.
See you around.
See you around.
↧
Free IP TV LIST 2450 CH beIN,OSN,CANALSAT,CANAL+ESP,SKYIT,DE,UK,MEO,NOS,DI GI TURK,....OTHERS
Information
| Free IP TV LIST 2450 CH beIN,OSN,CANALSAT,CANAL+ESP,SKYIT,DE,UK,MEO,NOS,DI GI TURK,....OTHERS |  |
********************
Civil_IPTV
↧